The VSI Series pump controller combines the operator interface, system logic, and field interface into a flexible product for water and wastewater applications. It is easily configured for individual applications using a touch sensitive screen.

Standard Features

• User-friendly touch screen display; simple to operate; easy to read and adjust
• Preconfigured for 2 to 6 pumps
• Automatic pump control from a proportional level input signal
• Alarm display for 3 alarm states
• Password protection for access to pump setup parameters
• Configurable pump start/stop levels, speeds, and alternation modes
• Manual level test simulator for safe testing of pump operation without the risk of leaving the level in manual mode

The Pump Setup display allows the operator to configure all of the operational parameters, as follows:

• Start/stop levels for each pump as a percent of the wet well level.
• Pump speed minimum and maximum settings.
• Alternation at a set time of day, maximum run time setting, or both. The lead pump may be manually advanced.

The Alarm screen display gives the operator a display of the complete system alarm history. This information includes when the alarm was triggered, when it was acknowledged, and when it was cleared. Each entry is identified by date, time, and alarm description.

The main screen display shows all status information for the system, including on/off, auto/manual, ready status, VFD/bypass, lead pump assignment, run time, and motor speed.

 

Pump Setup Screen

Alarm Screen